Synergy 8000-01 Heavy Duty Powder Coated Drag Link Kit for 07-18 Wrangler JK

  
Synergy 8000-01 Heavy Duty Powder Coated Drag Link Kit for 07-18 Wrangler JK. Heavy Duty Powder Coated Drag Link Kit. New and Improved Jeep JK Wrangler Heavy Duty Drag Link. Improving upon the success of our previous 8001 JK Drag Link, this version is larger in size and strength and prevents unwanted Drag Link Flop. You will not find a better drag link on the market! Drag Link is designed to be used in the stock location for up to 3 inch lift heights. For 3-6 inch lift heights the drag link should be flipped for a high steer setup. High Steer setup requires the Drag Link to be relocated to the top of the steering knuckle. Must use in conjunction with a raised front axle side track bar relocation bracket (See Synergy 8055, 8012-13, or 8009-01). Rear track bar should ideally be raised a similar amount at the axle. High Steer setup requires 16 inch or larger wheel diameter with a maximum 4-3/4 inch backspacing or wheel spacer with factory wheel setup.

4-1/2 inch back spacing is recommended. Minimum Length (Collapsed) = 38.75 inch. Maximum Length (Extended) = 41.25 inch. Drag Link bolts right into the factory mounts or can be relocated to the top of the steering knuckle for a high steer setup using included flip adapter (See Notes for high steer requirements). No factory drag link components need to be reused.

Includes Synergy HD Metal on Metal Tie Rod Ends with a Single Plane version at the pitman arm side to completely eliminate Drag Link Flop. Made from 1.5 inch x. Abrasion-resistant powder coat finish for maximum durability and corrosion resistance. Synergy Double Adjuster Sleeve allows adjustment of drag link length without removing it from the vehicle.

100% bolt-on components assures an easy, trouble free installation with the use of basic hand tools. Synergy Tie Rod and Drag Link both use the same tie rod end thread pitch, so one spare tie rod end (4131-L) can be used in any location in the steering. Drag Link fits all JK Wranglers, including those with aftermarket JK axle housings. Larger tubing size than previous design improves drag link strength and steering feel.

Offers a more direct connection to the road/trail compared to stock; no more bent drag links and constantly having to re-center your steering wheel. Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock and include grease fittings/replaceable dust boots for ease of maintenance. Synergy High Performance Grease recommended (4119).

Pitman arm side tie rod end is now a single plane design to eliminate unwanted drag link flop. You spoke and we listened. Drastically simplifies installation and only allows necessary degree of movement.

Drag Link Flip Adapter is NOW INCLUDED for those who will be converting to high steer. (1) Rod End Double Adjuster Sleeve (3622-07-18-PL). (1) Single Plane Tie Rod End (4139-L) (Pitman arm side). (1) Tie Rod End (4131-L) (Knuckle side). This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Tie Rods & Steering Linkages".

The seller is "trendsauto" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.

1. UPC: 887753146281
2. Manufacturer Part Number: 8000-01
3. MPN: 8000-01
4. Brand: Synergy
5. Manufacturer Warranty: Unspecified Length
6. Fitment Type: Direct Replacement
7. Type: Drag Link
8. Country/Region of Manufacture: United States
9. Placement on Vehicle: Lower
10. Superseded Part Number: 8001
11. Feature 1: No Factory Drag Link Components Need to Be Reused
12. Feature 2: Includes Synergy HD Metal on Metal Tie Rod Ends
13. Feature 3: With A Single Plane Version at The Pitman Arm Side
14. Feature 4: Made from 1.5 inch x .250 Wall DOM Tubing
15. Feature 5: Abrasion-Resistant Powder Coat Finish
16. Feature 6: Synergy Double Adjuster Sleeve
17. Feature 7: 100% Bolt-On Components
18. Part Type: Steering Drag Link
19. Included Hardware: Drag Link, Flip Adapter
20. Features: Greasable
21. Suspension Grade: Heavy Duty
22. Color: Black
23. Surface Finish: Powder Coated
24. Feature 8: Larger Tubing Size
25. Feature 9: Drag Link Bolts Right Into The Factory Mounts
26. Feature 10: Can Be Relocated to The top of Steering Knuckle
27. Material: DOM Tubing
28. Series: Drag Link Kit