CXP STAGE 5 HEAVY DUTY CLUTCH KIT Fits 1986-1995 SUZUKI SAMURAI SIDEKICK 1.3L

  

ClutchXperts Stage 5 Miba Racing Clutch Kit Is a brand new stage 5 Xtreme Duty Racing Pressure Plate With Stage 5 6-Puck Copper Ceramic SOLID Miba Racing Disc Setup can hold and 80% more pressure increase over stock. ClutchXperts Stage 5 Miba 6-Puck Miba composite Disc is the best material for friction.

It is used for Aircraft Brakes and is stronger than any other material in the clutch disc industry. If you want the best the industry has to offer, ask for ClutchXperts 6 Puck Miba Solid Rigid Copper Ceramic Miba Racing Disc. The ClutchXperts Racing 6 Puck Miba Disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced Miba Delivering Aggressive Bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, The ClutchXperts Racing 6 Puck Miba Strip Disc provides outstanding stability, smooth engagement, and less wear on opposing plates.

This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. If you are selecting a kit without a new flywheel, then be sure to resurface and rebalance your old flywheel prior to installation for best performance and result.

Street Or Long Life Of Clutch Break-In Required. Features Of ClutchXperts Stage 5 Miba Racing Clutch System. Heavy Duty Stage 5 Heavy duty racing pressure plate. Precision heat treated single diaphragm.

Re-Arched Diaphragm for Superior Engagement. NO unnecessary increase in pedal pressure.

6-Wings Ceramic Button Disc without sprung for heavily modified vehcles. More Grip Power, longer lasting.

High Temperature Resistance: Up To 930F (500C), Short Time Up To 1650F (900C). High And Stable Level Of Friction Coefficient. Miba Generates 3 To 15% Lower Torque Peaks Compared To The Competition; Reduces Gear Shocks Loads And Same Material As Using Aircraft Brakes. Miba Friction Group Has Been A Development Partner And Supplier Of High-Performance Friction Materials To The Automotive And Machine Industry For Over 30 Years. We Offer Optimized Components For Clutches, And Use High-Quality Materials And Innovative, Technologically Advanced, Processes To Ensure Excellent Wear-Resistance And Friction Coefficients. Clutch Segments Generate The Friction Needed For Torque Transfer From Engine To Transmission, Enabling The Vehicle To Start. They Are Characterized By Particularly High Temperature Resistance And Low Wear. Friction Materials Are An Important Performance Element In Vehicle And Machine Clutches, And Play A Key Role In Overall Efficiency. ClutchXperts Stage 5 Heavy Duty Pressure Plate (1700lbs Clamping Load). ClutchXperts Stage 5 6-PUCK Solid Ceramic MIBA Racing Disc (190mm, 20 Spline).

ClutchXperts Premium Heavy Duty Clutch Throwout Release Bearing. ClutchXperts Premium Heavy Duty Clutch Pilot Bearing. ClutchXperts Premium Heavy Duty Clutch Alignment Tool.

Fits 1986 - 1995 Suzuki Samurai (1.3L SOHC 4cyl). Fits 1989 - 1992 Suzuki Sidekick (1.3L SOHC 4cyl).

Surface Finish : Cast Iron, Copper-Ceramic MIBA Solid, Steel. Country of Manufacture : United States. FILE PICTURES ARE FOR REFERENCE ONLY.

Must be in brand new, resalable condition. We are located in Southern California. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Transmission & Drivetrain\Clutch Parts & Kits\Clutch Kits".

The seller is "clutchxperts" and is located in this country: US. This item can be shipped worldwide.

1. Brand: ClutchXperts
2. Type: Clutch Kit
3. Disc Diameter: 7.5 in (190 mm)
4. Manufacturer Part Number: CXP-STO50007HP5
5. OE/OEM Part Number: 51905001 KF748-01 04104 200.48008, 2210081A01
6. Number of Teeth: 20
7. Input Spline Quantity: 20
8. Disc Material: Ceramic Miba
9. Country/Region of Manufacture: United States
10. Manufacturer Warranty: Yes
11. Performance Part: Yes
12. Vintage Part: No
13. Input Shaft Diameter: 15/16\
14. Interchange Part Number: 51905001 KF748-01 04104 200.48008
15. Plate Diameter (Inner Friction Size): 7.5 in (190 mm)
16. Warranty: Yes
17. Surface Finish: Cast Iron, Copper-Ceramic MIBA Solid, Steel
18. Pressure Plate Type: OEM Type Diaphragm
19. Torque: 299HP
20. Horse Power: 269lb-ft
21. Clutch Material: Ceramic-Miba
22. Clutch Disc Style: High Torque 6-Puck Rigid Hub
23. Fitment Type: Direct Replacement
24. Transmission Type: Manual
25. Type of Transmissions: Manual Stick Shift Transmission
26. Returns Accepted: Returns Accepted