Chevelle Tubular Control Arms, 1964-72 A-Body Ride Height Adjustable Heavy Duty

  
Mopar B & E Body. Mopar A Body 5x4.5. Chevelle Tubular Control Arms, 1964-72 A-Body Ride Height Adjustable Heavy Duty. Fits all GM A-Body Cars from 1964 through 1972. Complete Upper Control Arm Sets with chrome cross shafts, bump stops, polyurethane bushings & ball joints, dust boots, castle nut set.

Lower Control Arm Set comes complete with polyurethane bushings, ball joints, dust boosts, castle nut set, grease fittings, bump stops, and deep spring pockets. Can be used with coil over or standard shocks.

Black Powder Coated Front Tubular Steel, stronger than the factory arms. 4 Piece Tubular Upper & Lower Control Arm Set. High Quality, Greesable, Delrin Bushings. The upper arms have 4 degrees of positive caster, lowers are stock. These will work with stock/standard coil springs and even coil over. Polyurethane Bushings & Urethane bump stops. Clean welding and High Quality Powder Coating.

Direct bolt on for cars with disc brakes, no modifications. Recommend for Stock Height Spindles Only.

Inner Coil Retainer Design with Spring Pad Cushion (be sure compare to competition, some do not offer this). Please use (Replacement Ball Joint Moog#'s: Uppers : K-5108 Lowers: K-5103). Pirate Jack Hot Rod Restoration is your one-stop-shop for quality disc brake conversions, brake boosters, master cylinders, and proportioning valves. We specialize in performance brakes for late fullsize GM cars from 1955-70 and muscle cars from 1962-74, Mopar, Chevy, & Ford. Pirate Jack also carries a full line of parts for Street Rods & Custom Built cars, including pedal assemblies, and hard to find power boosters, GM Restoration Parts, disc brake kits, and suspension products. Check out our tech page for information like how to test a brake booster, how to hook up a proportioning valve, how to plumb my brake lines, how to test my master cylinder and a F. Q's on how to calculate pedal ratio. We offer FREE tech support on all our disc brake kits and booster conversion kits to take the guess work out of your job. Pirate Jack offers how to guides and instructional videos on our video page. We strive to give you 100% satisfaction and we sincerely want to help you stop your vehicle and install our kits safely.

We want your restoration to be easy! We also have some instructional video's and other helpful support you may need. We give limited support on weekends and are available M-F 7:30-4:30 EST. Your order will be professionally and durably packed for its time in transit to you so we can give you the very best.

In addition, you will receive a packing slip to check over your order. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item "Chevelle Tubular Control Arms, 1964-72 A-Body Ride Height Adjustable Heavy Duty" is in sale since Friday, October 31, 2014. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Control Arms & Parts".

The seller is "pirate-jack-asheville-nc" and is located in Asheville, North Carolina. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, South africa, New Zealand, Reunion.

1. Description: High Quality Tubular Upper & Lower Control Arms
2. Adjustable: No
3. Included Hardware: Bushing
4. Other Part Number: CTA-42LP
5. Brand: MBM
6. Warranty: 1 Year
7. Country/Region of Manufacture: China
8. Ball Joints: Standard Ball Joints included on all 4 pieces
9. Control Arm Type: Forged
10. Sway Bar Linkage: Included
11. Bushings: Polyurethane Bushings
12. Lower Control Arm Tubing: Lowers are 1.625 OD - .156 wall DOM tubing
13. Upper Control Arm Tubing: Uppers are 1.125 OD - .125 wall DOM tubing
14. Grease Fittings: Grease Fitting are Included on the Lower Arms
15. OE Spec or Performance/Custom: Performance/Custom
16. Ball Joint Replacement #'s: Moog: Uppers : K-5108 Lowers: K-5103
17. Kit Parts Included: Shim Kit
18. Greasable or Sealed: Greasable
19. Manufacturer Part Number: LCAUCA6472 KIT
20. Surface Finish: Quality Black Powder Coating
21. Kit or Single Part: Kit
22. Application: 1964-72 Chevelle A-Body's
23. Placement on Vehicle: Front